Products

Decoring machine DCB18

This innovative decoring machine allows the contemporary treatment of several aluminium, cast iron and steel foundry castings.

It is equipped with housings where from 2 up to 4 castings can be placed. All the castings will be decored at the same time with at least a couple of hammers. The castings loading and unloading in the housings can happen both manually and with a robot outside the decoring machine.

The real innovation of this machine consists in its continuous rotation movement up to 360° that together with hammering helps to remove sand.

Main Features
  • Continuous rotation up to 360° in both rotation directions

  • 2 housings with the possibility to extend up to 4

  • Operator panel PLC on machine board to check the working parameters

  • To the casting size adaptable housings

  • Soundproof cabin, in accordance to the European law EN 1090-1:2009+A1:2011 and UNI EN ISO 11690-1

  • Light castings’ horizontal movement thanks to the use of the vibration produced by the hammers. No eccentric masses are used and so the frame resonance is accordingly reduced.

Technical Features
POWER CONSUMPTION
AIR CONSUMPTION
CASTING WEIGHT (with sand)
MAXIMUM CASTING SIZE
MINIMUM CASTING SIZE
8kW
min.1000 l/min. - max 1500 l/min.
70 kg each
300 x 300 x 450 h mm
160 x 160 x 300 h mm
POWER CONSUMPTION
AIR CONSUMPTION
CASTING WEIGHT (with sand)
MAXIMUM CASTING SIZE
MINIMUM CASTING SIZE
8kW
min.1000 l/min. - max 1500 l/min.
70 kg each
300 x 300 x 450 h mm
160 x 160 x 300 h mm
POWER CONSUMPTION
AIR CONSUMPTION
CASTING WEIGHT (with sand)
MAXIMUM CASTING SIZE
MINIMUM CASTING SIZE
8kW
min.1000 l/min. - max 1500 l/min.
70 kg each
300 x 300 x 450 h mm
160 x 160 x 300 h mm
Sistema di monitoraggio martelli di sterratura THOR V40 - O.M.LER s.r.l.